Best bias lighting for TVs and monitors 2022

If you want to improve the contrast of your TV without having to buy a brand-new set, bias lighting is an easy and relatively inexpensive way to do it. Bias, in this context, means that light is projected at an angle to your TV; more specifically, onto the back of your TV or onto the wall behind it, so that it casts a dim halo around the display.

Once installed, a bias light can boost the apparent contrast of your TV, making blacks and dark areas of the picture look deeper than they did before. Bias lighting can also help ease the strain of looking at a bright TV screen in a darkened room.

Updated on October 17, 2022 with a link to our Govee Envisual TV Backlight T2 review.

The best bias lighting for each use case

Philips Hue Play light bar (double pack) — Best bias lighting for TVs and computer monitors

Pros

• Easy setup
• Integrates with the comprehensive Philips Hue ecosystem
• Attractive bias lighting for your TV
• Syncs with your computer monitor

Cons

• Expensive
• Requires $60 Hue Bridge
• TV syncing is a cumbersome process

Philips took its expertise in smart blubs and applied it to bias lighting, with predictably impressive results. But as much as we liked using the Hue Play bias lights with our TV, we preferred using the twin light bars behind our computer monitor, where their ability to sync with the screen allowed them to shine, quite literally.

The Hue Play light bar replaces our previous editor’s choice, the MediaLight TV bias lighting strip, only because the specific MediaLight strip we reviewed has been discontinued. We’ll review its successor once we get our hands on a test unit.

Read our full
Philips Hue Play light bar (double pack)review

Philips Hue Play HDMI Sync Box — Best responsive TV bias lighting

While the Philips Hue Play lighting kit can only sync with a computer monitor, the Hue Play HDMI Sync Box lets you sync your Hue lights with your living room TV via HDMI, perfect for putting on dramatic light shows that perfectly match your videos and music. There’s no remote, however, and the setup process can be somewhat involved.

Read our full
Philips Hue Play HDMI Sync Boxreview

What exactly is bias lighting for TVs and computer monitors?

Bias lighting for TV sets and computer monitors takes a variety of forms. Most common are peel-and-stick strips of LEDs that adhere to the back of the screen, either in a single strip or on multiple sides of your display. There are also bias lights that sit next to or behind your set, casting a dim (or in some cases, not so dim) light on the wall.

Besides their form factors, some bias lights function differently than others to achieve different effects. The fancier bias lighting systems can sync with the picture on your screen, which makes it look like the colors on your TV are bleeding onto the wall. Other bias lights cast more of a static light, sometimes only white but often with color. Needless to say, there are many schools of thought about which kind of bias lighting for TVs is the best.

How bias lighting boosts your TV’s contrast

Once you’ve set your bias lights to the correct brightness, they can improve the contrast on your TV screen; more precisely, they can boost the perceived contrast on your TV.

Check out this fascinating article on How-To Geek for the nitty-gritty on how this illusion works. In a nutshell, if you take the a single shade of gray, your eyes will see it as darker on a lighter background, and lighter on a dark background. The same principle works when it comes to the colors on a TV screen: In a brightly lit room, the dark areas in a TV’s picture will appear darker than they do in a pitch-black room.

The problem with watching TV in a lit room is that the ambient light tends to rob dark areas in the picture of detail you’d probably see in a dimly lit or completely dark room. In the parlance of videophiles, this loss of detail in darker areas is called “black crush.”

The beauty of bias lighting is that it gives us the best of both worlds. By casting a pale halo behind the TV screen, bias lights can give you enough light around the picture to make dark or gray areas look darker than they would without the bias light. But because bias lights don’t shine light directly on the screen, they don’t hide the details in the shadows.

Careful calibration of your bias lights is the key to boosting your TV’s apparent contrast without crushing dark areas. Ideally, the bias lights should be turned up just enough to improve the perceived contrast, but before the point where you start losing detail. According to some experts, your bias lights should throw off no more than 10 percent of the light that your TV screen does.

Bias TV lighting can ease eyestrain

You’re giving your eyes quite a workout if you’re watching a bright TV screen in a pitch-black room. Again, How-To Geek goes into much greater detail about why, but to simplify things, let’s just say that when you’re watching a bright TV in a dark room, your pupils dilate to accommodate your overall dark surroundings, despite the fact that you’re focusing on a bright picture. The result: eye fatigue, which comes in the form of sore, watery eyes, blurred vision, headaches, or even a sore neck and shoulders (so says the Mayo Clinic).

By casting a dim halo around your TV screen, bias lights are able to boost the overall light level in the room without blowing out your pictures, giving your pupils just enough of a break to keep eyestrain at bay.

Bias lights are great for computer monitors

The TV screen in your living room isn’t the only display that can benefit from bias lighting. If you spend all day looking at a computer monitor, a bias light can do wonders for your eyes, particularly if you’re working in a dark office. And if you’re a PC gamer looking for some extra immersion, look for a bias lighting system that can sync with a desktop system.

6500K is the magic (Kelvin) number

Brightness is only one factor when it comes to bias lighting; color is another, and it’s crucial.

If you care about seeing the same image on your screen that the creators of your favorite movies and TV shows intended, the last thing you want to do is distort the colors on the screen. But if your bias lights are red, yellow, blue, green, or some other color besides a precise shade of white, that’s exactly what you’re doing. If your bias light is too warm (think red), you’ll make the picture on your screen look cooler (more blue) than it should, and vice versa.

Ask any professional TV calibrator, and they’ll tell you that bias lights for TVs should be tuned to a color temperature of about 6500K (or, to be more precise, to the D65 color point), which can be roughly described as the color of daylight on a hazy day.

Why 6500K? Because that’s the color temperature that the video industry uses as their standard for what “white” looks like. By using the 6500K standard, videographers and filmmakers can be reasonably sure that (for example) the particular hue of a yellow car in a scene looks the same shade of yellow on your TV as it does in their cameras and monitors.

When shopping for a bias light, be sure to pick one that says it has a 6500K color temperature mode; it’s the easiest way to help ensure that your bias light doesn’t throw off the colors on your screen.

Some bias lights can sync with your display

If you’re looking for an effect that makes your TV screen look like it’s extending onto the wall, consider a so-called “responsive” bias lighting system.

Bias lights that sync with your TV do so in a variety of ways. Some of them connect via HDMI, essentially sitting between a video source and your TV. It’s one of the more precise ways to sync bias lights with your TV picture, but it can also lead to compatibility issues with HDCP-protected video, and you might be limited by number of HDMI inputs your bias lights provide. If it has just one HDMI input, you’ll need to choose whether to use it with your Ultra HD Blu-ray player, your media streamer, your gaming console, or your set-top box for example.

Another method of syncing bias lights with your TV is to use your computer as a go-between, with the lights syncing with video on your PC or Mac that is then mirrored on your TV. Syncing bias lighting via your computer can be as precise as it is over HDMI, but mirroring video on your desktop or laptop computer can be a cumbersome process. And just as with HDMI, copy protection schemes can gum up the works when it comes to syncing bias lights with video on your computer.

A third method of syncing your TV picture with bias lights is by using a camera to scan the screen. The camera might be mounted on your TV and angled so it gets a decent view of your screen, or it could be placed in front of your set, say on a coffee table. Using a camera to sync your bias lights bypasses the issue of copy protection and HDMI inputs, as the camera can scan anything that appears on your screen. That said, you’ll need to deal with the annoyance of installing a camera either on your TV or somewhere in your living room, and the precision of the light syncing might be inferior compared to syncing via HDMI or computer.

No matter which method of syncing a given responsive bias lighting setup uses, lag tends to be a factor, with synced bias lights often a beat or so behind what’s on your TV screen.

Also, remember everything we just said about 6500K and preserving the integrity of the colors on your screen. Needless to say, responsive bias lighting throws all that out the window, with the pulsing colors playing all kinds of havoc with the colors in the picture, not to mention distractions that responsive lights cause.

Bias TV lighting kits that didn’t make the cut

Developed by the publishers of such oft-used video-calibration discs as Joe Kane’s Digital Video Essentials, the MediaLight TV bias lighting strip was our original editor’s choice for static TV bias lighting. Adhering to the 6500K color temperature standard, the MediaLight strip is for purists who want to add bias lighting to their home theater setups while preserving the integrity of the picture on their screens. The only reason we’re nixing it from its top spot is that the model we reviewed was discontinued, and has since been replaced by the MediaLight Mk2. We’ll have a full review of the Mk2 once we give it a test run.

Meanwhile, the affordable Luminoodle Color Bias Lighting system is easy to install and brings 15 colors and three lighting modes to the table, but it lacks a true white mode, and it has fewer brightness steps than we’d like. Govee’s DreamColor for TV with Alexa is one of the least-expensive bias lighting kits we’ve seen that syncs with your screen, but lag can be an issue, and its performance varies depending on what you’re watching. Govee also offers its newer Immersion Light Kit, which we felt delivered a “busy” and “distracting” viewing experience that wasn’t worth the complex setup process.